AirDrop usually fails because Bluetooth or Wi-Fi is off, the receiving setting is locked to “No One,” or the two devices sit too far apart. Fix those three things first and most transfers go through on the next try, rather than emailing yourself the file instead.

Here is the check order, plus what differs between two iPhones and an iPhone-to-Mac transfer.

Turn on Bluetooth and Wi-Fi on both devices

AirDrop needs Bluetooth to find nearby devices and Wi-Fi to move the file, even with no router nearby. On iPhone, check both icons in Control Center. On Mac, check the menu bar icons.

A common trap: Wi-Fi shows “on” but sits on a network that blocks peer-to-peer traffic, which some office and coffee shop networks do. If stuck, turn Wi-Fi off entirely on both devices; AirDrop builds its own connection and needs no internet access.

Set AirDrop receiving to Everyone or Contacts Only

On iPhone, go to Settings, then General, then AirDrop, and set Receiving to “Everyone for 10 Minutes” or “Contacts Only.” “Receiving Off” means nothing lands, period.

On Mac, open Finder, click AirDrop in the sidebar, and switch the dropdown away from “No One.” Strangers outside your contacts need “Everyone”; “Contacts Only” fails silently otherwise.

Unlock both devices and stay within range

AirDrop will not appear as discoverable if the receiving device is asleep or locked, so wake it and keep it unlocked during the transfer. On Mac, leaving the AirDrop window open in Finder speeds up detection on older macOS versions.

Range matters too: AirDrop works reliably under 30 feet with a clear line of sight and degrades through walls. Older hardware will not show AirDrop at all; you need a 2012 or newer Mac on Yosemite or later, and an iPhone on iOS 7 or later.

Toggle Airplane Mode, then restart if nothing else works

Turning Airplane Mode on for 10 seconds, then off, resets the Bluetooth and Wi-Fi radios at once and clears a surprising number of AirDrop glitches. Try it on whichever device is missing from the share sheet.

Still stuck? Restart that device fully. A restart clears a stuck background process holding the radios in a bad state, a common reason a device goes invisible to AirDrop despite correct settings.

Sign both devices into the same iCloud account

Sending between your own devices requires both signed into iCloud for “Contacts Only” mode to recognize each other automatically. Check Settings, then your name, on iPhone, and System Settings, then Apple ID, on Mac. Signed out on either end quietly drops the device from the list, with no error message.

iPhone-to-iPhone versus iPhone-to-Mac

Between two iPhones, transfers are nearly instant once Bluetooth, Wi-Fi, and Receiving line up, since both share the same AirDrop implementation. An active Personal Hotspot on either phone can interfere; turn it off if the connection will not form.

iPhone-to-Mac has one extra failure point. macOS Sonoma and later split AirDrop permissions between the Finder sidebar toggle and a separate entry under System Settings, General, then AirDrop & Handoff. Check both, since changing only one often leaves the Mac invisible as a target.

If every step checks out and AirDrop still fails, confirm Bluetooth itself works by pairing an accessory like AirPods first. A shaky home Wi-Fi signal can disguise itself as an AirDrop problem too, and an unresponsive screen is worth ruling out with our guide on a phone screen not responding to touch before blaming AirDrop.

Why does AirDrop show my contact’s name but never finish?

Bluetooth found the device but Wi-Fi failed to open the data connection. Turn Wi-Fi off on both ends so AirDrop falls back to its own direct link.

Why does AirDrop work at home but not at a coffee shop?

Public and corporate networks often block the peer-to-peer traffic AirDrop needs. Keep Bluetooth on and turn Wi-Fi off on both devices instead.

Can I AirDrop between an iPhone and a Windows PC?

No. AirDrop only works across Apple hardware. Use iCloud, email, cloud storage, or a cable for a Windows PC.